main/iproute2-qos: updated scripts

4 files changed, 556 insertions, 136 deletions

diff --git a/main/iproute2-qos/APKBUILD b/main/iproute2-qos/APKBUILD
index 902ff0c1aef..7851e63d24c 100644
--- a/main/iproute2-qos/APKBUILD
+++ b/main/iproute2-qos/APKBUILD
@@ -1,21 +1,25 @@
 # Contributor: Ilya Strelkin <iilluzion@gmail.com>
 # Maintainer: Ilya Strelkin <iilluzion@gmail.com>
 pkgname=iproute2-qos
-pkgver=0.1
+pkgver=0.2
 pkgrel=0
 pkgdesc="Scripts to set up quality of service with iproute2"
 url="http://git.alpinelinux.org/cgit/aports"
 license="GPL"
 depends="iproute2"
 makedepends=""
-source="qos.initd qos.confd setup-qos"
+source="qos.initd qos.eth0.sample qos.ifb0.sample setup-qos"
 
 build() {
 	install -m755 -D "$srcdir"/setup-qos "$pkgdir"/usr/sbin/setup-qos
 	install -m755 -D "$srcdir"/qos.initd "$pkgdir"/etc/init.d/qos
-	install -m644 -D "$srcdir"/qos.confd "$pkgdir"/etc/conf.d/qos
+	install -m644 -D "$srcdir"/qos.eth0.sample \
+		"$pkgdir"/etc/conf.d/qos.eth0.sample
+	install -m644 -D "$srcdir"/qos.ifb0.sample \
+		"$pkgdir"/etc/conf.d/qos.ifb0.sample
 }
 
-md5sums="024b3e5b6f6cca09a729ce265898a0c7  qos.initd
-d4cc8ff1e36312cbe816c1540c4f2d92  qos.confd
+md5sums="d4f225300dab94078e0c51f292bf558c  qos.initd
+aeb793e4e1e7219bf245c06e29212048  qos.eth0.sample
+d9bbf66187a62485450397c4e93d1293  qos.ifb0.sample
 785aff5d4284c47038a009797c576e34  setup-qos"
diff --git a/main/iproute2-qos/qos.eth0.sample b/main/iproute2-qos/qos.eth0.sample
new file mode 100644
index 00000000000..a8d1d385678
--- /dev/null
+++ b/main/iproute2-qos/qos.eth0.sample
@@ -0,0 +1,130 @@
+# Device being configured
+DEV=eth0
+
+# IFB device is used to mirror ingress traffic from $DEV (see INGRESS_ALG)
+IFB_DEV=ifb0 # Leave blank if $DEV is ifbX
+
+# Internet EGRESS/INGRES rates in kbit or mbit. Measure this on a free line to gain precise value
+EGRESS_RATE=1000kbit	# 128kbit, 256kbit, 512kbit
+INGRESS_RATE=1000kbit	# 256kbit, 512kbit, 1024kbit
+
+# In order to control a queue at the router/bridge side we will downgrade a real link speed on purpose
+RATE_SUB_PERCENT=5	# 20, 10
+
+# Device physical speed in kbit or mbit
+DEV_RATE=50mbit
+
+# EGRESS root Classfull Disciplins
+#
+#  htb:    if link is not congested or you want to control busrts of traffic; recommended for downstream.
+#  hfsc:   if link is congested and you need to control guarantees of delay; recommended for upstream.
+#		dmax = 50-100 [ms] = 50000-100000 [microsec]
+#		umax = MIN (rate * (dmax / 1000), 1500) [b]
+#  prio:   if rate is variable and you want to be sure that interactive traffic has ultimate priority
+#  none:   if link is not congested 
+#
+EGRESS_ALG=hfsc
+
+# EGRESS leaf Queuing Disciplines
+#
+#  pfifo:  real-time streams or IPSEC
+#  sfq:    TCP sessions or best-effort class traffic
+#  red:    hightly congested links or high-speed Internet [> 10Mbit/sec])
+#
+INTERACTIVE_LEAF_QDISC=pfifo
+PRIVILEGED_LEAF_QDISC=pfifo
+BESTEFFORT_LEAF_QDISC=red
+LAN_LEAF_QDISC=sfq
+
+# INGRESS treatment
+#
+#  police:  if link is constantly heavy congested set simple traffic policing
+#  cpolice: if link is constantly heavy congested but you need certain dedicated rates then set classfull traffic policiing
+#  ifb:    shape INGRESS traffic as EGRESS of intermediate IFB device (aka imq)
+#  none:    if link is not congested 
+#
+INGRESS_ALG=ifb
+
+# Filter rules (see tc, tc-filters man pages). 
+#  You may have multiple <CLASS-NAME>_FILTER_<n> items. 
+#  Maximum 100 filter items are allowed for each class.
+#  By default ALL unclassified traffic is being assined to Best-Effort class.
+
+# UDP
+INTERACTIVE_FILTER_1="protocol ip prio 100 u32 match ip protocol 0x11 0xff"
+
+# ICMP
+INTERACTIVE_FILTER_2="protocol ip prio 100 u32 match ip protocol 0x1 0xff"
+
+# ACK with payload < 64 bytes (32-bit version)
+INTERACTIVE_FILTER_3="protocol ip prio 100 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33"
+
+# ACK with payload < 64 bytes
+INTERACTIVE_FILTER_4="protocol ip prio 100 u32 match ip protocol 6 0xff match u8 0x10 0xff at nexthdr+13 match u16 0x0000 0xffc0 at 2"
+
+# PHB	TOS		HEX
+# --------------------------
+#			0x10
+#			0x18
+# CS1	PRIORITY	0x20
+# AF11 			0x28
+# AF12 			0x30
+# AF13 			0x38
+#
+# CS2	IMMEDIATE	0x40
+# AF21			0x48
+# AF22			0x50
+# AF23			0x58
+#
+# CS5	CRITICAL	0xA0
+# EF			0xB8
+#
+# CS6 INTERNETWORKCONTROL 0xC0
+# CS7 NETWORKCONTROL	0xE0 
+
+INTERACTIVE_FILTER_5="protocol ip prio 100 u32 match ip tos 0x10 0xff"
+INTERACTIVE_FILTER_6="protocol ip prio 100 u32 match ip tos 0x18 0xff"
+INTERACTIVE_FILTER_7="protocol ip prio 100 u32 match ip tos 0xa0 0xff"
+INTERACTIVE_FILTER_8="protocol ip prio 100 u32 match ip tos 0xb8 0xff"
+
+# SSH
+PRIVILEGED_FILTER_1="protocol ip prio 100 u32 match ip dport 22 0xffff"
+PRIVILEGED_FILTER_2="protocol ip prio 100 u32 match ip sport 22 0xffff"
+
+# Remote Desktop
+PRIVILEGED_FILTER_3="protocol ip prio 100 u32 match ip dport 3389 0xffff"
+PRIVILEGED_FILTER_4="protocol ip prio 100 u32 match ip sport 3389 0xffff"
+
+# ESP
+PRIVILEGED_FILTER_5="protocol ip prio 100 u32 match ip protocol 0x32 0xff"
+
+# AH
+PRIVILEGED_FILTER_6="protocol ip prio 100 u32 match ip protocol 0x33 0xff"
+
+# PHB	TOS		HEX
+# --------------------------
+# CS3	FLASH		0x60
+# AF31			0x68
+# AF32			0x70
+# AF33			0x78
+#
+# CS4	FLASHOVERRIDE 	0x80
+# AF41			0x88
+# AF42			0x90
+# AF43			0x98
+
+PRIVILEGED_FILTER_7="protocol ip prio 100 u32 match ip tos 0x88 0xff"
+
+# IPSEC-NAT
+PRIVILEGED_FILTER_8="protocol ip prio 90 u32 match ip protocol 0x11 0xff match ip dport 4500 0xffff"
+PRIVILEGED_FILTER_9="protocol ip prio 90 u32 match ip protocol 0x11 0xff match ip sport 4500 0xffff"
+
+
+# Example: Any traffic from/to 192.168.1.0/24 network will be classified as best-effort
+#
+### BESTEFFORT_FILTER_1="protocol ip prio 3 u32 match ip src 192.168.1.0/24"
+### BESTEFFORT_FILTER_2="protocol ip prio 4 u32 match ip dst 192.168.1.0/24"
+
+# Example: Traffic Originated from router
+#
+###LAN_FILTER_1="protocol ip prio 10 u32 match ip src 192.168.1.10"
\ No newline at end of file
diff --git a/main/iproute2-qos/qos.ifb0.sample b/main/iproute2-qos/qos.ifb0.sample
new file mode 100644
index 00000000000..2f382b27f52
--- /dev/null
+++ b/main/iproute2-qos/qos.ifb0.sample
@@ -0,0 +1,131 @@
+# Device being configured
+DEV=ifb0
+
+# IFB device is used to mirror ingress traffic from $DEV (see INGRESS_ALG)
+IFB_DEV= # Leave it blank if $DEV is ifbX
+
+# Internet EGRESS/INGRES rates in kbit or mbit. Measure this on a free line to gain precise value
+EGRESS_RATE=1000kbit	# 128kbit, 256kbit, 512kbit
+INGRESS_RATE=1000kbit	# 256kbit, 512kbit, 1024kbit
+
+# In order to control a queue at the router/bridge side we will downgrade a real link speed on purpose
+RATE_SUB_PERCENT=5	# 20, 10
+
+# Device physical speed in kbit or mbit.
+DEV_RATE=50mbit
+
+# EGRESS root Classfull Disciplins
+#
+#  htb:    if link is not congested or you want to control busrts of traffic; recommended for downstream.
+#  hfsc:   if link is congested and you need to control guarantees of delay; recommended for upstream.
+#		dmax = 50-100 [ms] = 50000-100000 [microsec]
+#		umax = MIN (rate * (dmax / 1000), 1500) [b]
+#  prio:   if rate is variable and you want to be sure that interactive traffic has ultimate priority
+#  none:   if link is not congested 
+#
+EGRESS_ALG=htb
+
+# EGRESS leaf Queuing Disciplines
+#
+#  pfifo:  real-time streams or IPSEC
+#  sfq:    TCP sessions or best-effort class traffic
+#  red:    hightly congested links or high-speed Internet [> 10Mbit/sec])
+#
+INTERACTIVE_LEAF_QDISC=pfifo
+PRIVILEGED_LEAF_QDISC=pfifo
+BESTEFFORT_LEAF_QDISC=red
+LAN_LEAF_QDISC=sfq
+
+# INGRESS treatment
+#
+#  police:  if link is constantly heavy congested set simple traffic policing
+#  cpolice: if link is constantly heavy congested but you need certain dedicated rates then set classfull traffic policiing
+#  ifb:	    shape INGRESS traffic as EGRESS of intermediate IFB device (aka imq)
+#  none:    if INGRESS traffic already is being shaped or if IFB device is being configured
+#
+INGRESS_ALG=none
+
+# Filter rules (see tc, tc-filters man pages). 
+#  You may have multiple <CLASS-NAME>_FILTER_<n> items. 
+#  Maximum 100 filter items are allowed for each class.
+#  By default ALL unclassified traffic is being assined to Best-Effort class.
+
+# UDP
+INTERACTIVE_FILTER_1="protocol ip prio 100 u32 match ip protocol 0x11 0xff"
+
+# ICMP
+INTERACTIVE_FILTER_2="protocol ip prio 100 u32 match ip protocol 0x1 0xff"
+
+# ACK with payload < 64 bytes (32-bit version)
+INTERACTIVE_FILTER_3="protocol ip prio 100 u32 match ip protocol 6 0xff match u8 0x05 0x0f at 0 match u16 0x0000 0xffc0 at 2 match u8 0x10 0xff at 33"
+
+# ACK with payload < 64 bytes
+INTERACTIVE_FILTER_4="protocol ip prio 100 u32 match ip protocol 6 0xff match u8 0x10 0xff at nexthdr+13 match u16 0x0000 0xffc0 at 2"
+
+# PHB	TOS		HEX
+# --------------------------
+#			0x10
+#			0x18
+# CS1	PRIORITY	0x20
+# AF11 			0x28
+# AF12 			0x30
+# AF13 			0x38
+#
+# CS2	IMMEDIATE	0x40
+# AF21			0x48
+# AF22			0x50
+# AF23			0x58
+#
+# CS5	CRITICAL	0xA0
+# EF			0xB8
+#
+# CS6 INTERNETWORKCONTROL 0xC0
+# CS7 NETWORKCONTROL	0xE0 
+
+INTERACTIVE_FILTER_5="protocol ip prio 100 u32 match ip tos 0x10 0xff"
+INTERACTIVE_FILTER_6="protocol ip prio 100 u32 match ip tos 0x18 0xff"
+INTERACTIVE_FILTER_7="protocol ip prio 100 u32 match ip tos 0xa0 0xff"
+INTERACTIVE_FILTER_8="protocol ip prio 100 u32 match ip tos 0xb8 0xff"
+
+
+# SSH
+PRIVILEGED_FILTER_1="protocol ip prio 100 u32 match ip dport 22 0xffff"
+PRIVILEGED_FILTER_2="protocol ip prio 100 u32 match ip sport 22 0xffff"
+
+# Remote Desktop
+PRIVILEGED_FILTER_3="protocol ip prio 100 u32 match ip dport 3389 0xffff"
+PRIVILEGED_FILTER_4="protocol ip prio 100 u32 match ip sport 3389 0xffff"
+
+# ESP
+PRIVILEGED_FILTER_5="protocol ip prio 100 u32 match ip protocol 0x32 0xff"
+
+# AH
+PRIVILEGED_FILTER_6="protocol ip prio 100 u32 match ip protocol 0x33 0xff"
+
+# PHB	TOS		HEX
+# --------------------------
+# CS3	FLASH		0x60
+# AF31			0x68
+# AF32			0x70
+# AF33			0x78
+#
+# CS4	FLASHOVERRIDE 	0x80
+# AF41			0x88
+# AF42			0x90
+# AF43			0x98
+
+PRIVILEGED_FILTER_7="protocol ip prio 100 u32 match ip tos 0x88 0xff"
+
+# IPSEC-NAT
+PRIVILEGED_FILTER_8="protocol ip prio 90 u32 match ip protocol 0x11 0xff match ip dport 4500 0xffff"
+PRIVILEGED_FILTER_9="protocol ip prio 90 u32 match ip protocol 0x11 0xff match ip sport 4500 0xffff"
+
+
+# Example: Any traffic from/to 192.168.1.0/24 network will be classified as best-effort
+#
+### BESTEFFORT_FILTER_1="protocol ip prio 3 u32 match ip src 192.168.1.0/24"
+### BESTEFFORT_FILTER_2="protocol ip prio 4 u32 match ip dst 192.168.1.0/24"
+
+# Example: Traffic Originated from router
+#
+###LAN_FILTER_1="protocol ip prio 10 u32 match ip src 192.168.1.10"
\ No newline at end of file
diff --git a/main/iproute2-qos/qos.initd b/main/iproute2-qos/qos.initd
index b543748691e..825ef07cfd5 100644
--- a/main/iproute2-qos/qos.initd
+++ b/main/iproute2-qos/qos.initd
@@ -8,17 +8,23 @@
 # Distributed under GPL-2
 ###########################################################################################################
 
-PROGRAM=qos
-CONFIG=/etc/conf.d/qos
+PROGRAM=$SVCNAME
+CONFIG=/etc/conf.d/$SVCNAME
 DEBUG=0 #1
 
-opts="compile"
+opts="describe compile"
 
+###########################################################################################################
+#
+#
 depend() 
 {
 	need net
 }
 
+###########################################################################################################
+#
+#
 checkconfig() {
 	if [ ! -e $CONFIG ] ; then
 		eerror "You need to create $CONFIG first."
@@ -26,33 +32,125 @@ checkconfig() {
 	fi
 }
 
-usage()
+###########################################################################################################
+#
+#
+bits()
 {
-	echo "usage: $PROGRAM [status|compile|start|stop|restart]"
-	echo "   status:  View statistics"
-	echo "   compile: Generate traffic control commands"
-	echo "   start:   Start traffic control"
-	echo "   stop:    Stop traffic control"
-	echo "   restart: Restart traffic control"
+        RATE=0
+        R_RATE=$1
+
+        R_NUMBER=`echo "$R_RATE" | sed -e "s/[^0-9]//g"`
+        R_UNIT=`echo "$R_RATE" | sed -e "s/[0-9]//g"`
+
+        if [ "$R_UNIT" == "" ]; then
+                R_UNIT="kbit"
+        fi
+
+        if [ "$R_UNIT" == "kbps" ]; then   R_RATE=$(($R_NUMBER * 1024 * 8))
+        elif [ "$R_UNIT" == "mbps" ]; then R_RATE=$(($R_NUMBER * 1024 * 1024 * 8))
+        elif [ "$R_UNIT" == "mbit" ]; then R_RATE=$(($R_NUMBER * 1024 * 1024))
+        elif [ "$R_UNIT" == "kbit" ]; then R_RATE=$(($R_NUMBER * 1024))
+        elif [ "$R_UNIT" == "bps" ]; then  R_RATE=$(($R_NUMBER * 8))
+        else
+                echo "Unknown unit '$R_UNIT' (mbps, mbit, kbit, kbps, bps)"
+        fi
+
+        echo "$R_RATE"
 }
 
+###########################################################################################################
+#
+#
+expand_leaf_qdisc()
+{
+	case "$1" in
+		pfifo)	echo "pfifo limit 5";;
+		sfq)	echo "sfq perturb 10";;
+		red)	echo "red min $RED_MIN max $RED_MAX burst $RED_BURST limit $RED_LIMIT probability $RED_PROB avpkt $RED_AVPKT";;
+	esac
+}
+
+###########################################################################################################
+#
+#
 configure()
 {
-	source $CONFIG $1
+	if [ ! -z $1 ]; then
+		eval WAN_RATE="\$$1"_RATE
+			WAN_RATE=`bits $WAN_RATE`
+
+		# Calculaton of WAN classes rates
+		WAN_SUB_RATE=$((WAN_RATE - (RATE_SUB_PERCENT * WAN_RATE / 100)))
+			INTERACTIVE_RATE=$((WAN_SUB_RATE / 5))
+			PRIVILEGED_RATE=$((WAN_SUB_RATE / 2))
+			BESTEFFORT_RATE=$((WAN_SUB_RATE / 3))
+
+		DEV_RATE=${DEV_RATE:-$EGRESS_RATE}
+			DEV_RATE=`bits $DEV_RATE`
+				if [ $DEV_RATE -lt $WAN_RATE ]; then
+					DEV_RATE=$WAN_RATE
+				fi
+		OUT_OF_WAN_RATE=$((DEV_RATE - WAN_RATE))
+
+		# Calculation of Queuing Discipline parameters
+		INTERACTIVE_PRIO_LATENCY=50000
+		INTERACTIVE_PRIO_BURST=$((INTERACTIVE_RATE / 100 / 8))
+
+		INTERACTIVE_HFSC_DMAX=50000
+		INTERACTIVE_HFSC_UMAX=$((INTERACTIVE_RATE * INTERACTIVE_HFSC_DMAX / 1000 / 1000))
+	        	[ $INTERACTIVE_HFSC_UMAX -gt 1500 ] && INTERACTIVE_HFSC_UMAX=1500
+
+		PRIVILEGED_HFSC_DMAX=100000
+		PRIVILEGED_HFSC_UMAX=$((PRIVILEGED_RATE * PRIVILEGED_HFSC_DMAX / 1000 / 1000))
+        		[ $PRIVILEGED_HFSC_UMAX -gt 1500 ] && PRIVILEGED_HFSC_UMAX=1500
+
+		# Random Early Detect (RED) parameters calculation:
+		#  min         = maximum delay * rate (dalay ~ 200ms = 0.2sec) [b]
+		#  max         = 3 * min [b]
+		#  avpkt       = 1000 (MTU 1500)
+		#  limit       = 8 * max [b]
+		#  burst       = (min + min + max)/(3 * avpkt) [b]
+		#  probability = 0.02
+
+		RED_DELAY=200
+		RED_MIN=$((RED_DELAY * BESTEFFORT_RATE / 1000 / 8)) # devided on 8 since rate given in bit/s so we get bytes
+		RED_MAX=$((3 * RED_MIN))
+		RED_AVPKT=1000
+		RED_PROB=0.02
+		RED_BURST=$(((RED_MIN + RED_MIN + RED_MAX) / (3 * RED_AVPKT)))
+		RED_LIMIT=$((8 * RED_MAX))
+
+		# Setting leaf Queuing Disciplines parameters
+		INTERACTIVE_LEAF_QDISC=`expand_leaf_qdisc $INTERACTIVE_LEAF_QDISC`
+		PRIVILEGED_LEAF_QDISC=`expand_leaf_qdisc $PRIVILEGED_LEAF_QDISC`
+		BESTEFFORT_LEAF_QDISC=`expand_leaf_qdisc $BESTEFFORT_LEAF_QDISC`
+		LAN_LEAF_QDISC=`expand_leaf_qdisc $LAN_LEAF_QDISC`
+	fi
 }
 
+###########################################################################################################
+#
+#
 reset()
 {
-	for DEV in $DEVICES; do
-		tc qdisc show dev $DEV | grep -v "pfifo_fast" | egrep -q "$QDISCS" && $ECHO tc qdisc del dev $DEV root
-		tc qdisc show dev $DEV | grep -v "pfifo_fast" | grep  -q ingress && $ECHO tc qdisc del dev $DEV ingress
-	done
+	# Supported Queuing Disciplines
+	QDISCS="prio|tbf|htb|hfsc|sfq|red|pfifo"
+
+	tc qdisc show dev $DEV | grep -v "pfifo_fast" | egrep -q "$QDISCS" && $ECHO tc qdisc del dev $DEV root
+	tc qdisc show dev $DEV | grep -v "pfifo_fast" | grep  -q ingress && $ECHO tc qdisc del dev $DEV ingress
+
+	if [ "$INGRESS_ALG" = "ifb" ] && [ ! -z $IFB_DEV ]; then 
+		$ECHO ip link set dev $IFB_DEV down
+	fi
 }
 
+###########################################################################################################
+#
+#
 set_leaf_qdisc()
 {
-	DEV=$1
-	PARENT_CLASSID=$2
+	PARENT_CLASSID=$1
 		PARENT_CLASSID=${PARENT_CLASSID:-1}
 
 	if [ ! "$QDISC_CMD" = "prio" ]; then 
@@ -62,170 +160,217 @@ set_leaf_qdisc()
 	$ECHO tc qdisc add dev $DEV parent $PARENT_CLASSID:50 handle 50 $PRIVILEGED_LEAF_QDISC
 	$ECHO tc qdisc add dev $DEV parent $PARENT_CLASSID:60 handle 60 $BESTEFFORT_LEAF_QDISC
 
-	if [ $DIRECTION = "DOWN" ]; then 
+	if [ $OUT_OF_WAN_RATE -gt 0 ]; then
 		$ECHO tc qdisc add dev $DEV parent $PARENT_CLASSID:70 handle 70 $LAN_LEAF_QDISC
 	fi
 
 	$ECHO
 }
 
+###########################################################################################################
+#
+#
 set_filters()
 {
 	CLASS_TYPES="INTERACTIVE PRIVILEGED BESTEFFORT"
-		if [ $DIRECTION = "DOWN" ]; then
+		if [ $OUT_OF_WAN_RATE -gt 0 ]; then
 			CLASS_TYPES=$CLASS_TYPES" LAN"
-		fi 
+		fi
 
 		PRIVILEGED_FILTER_FLOWID=50
 		BESTEFFORT_FILTER_FLOWID=60
 		LAN_FILTER_FLOWID=70
 
-	for DEV in $DEVICES; do
-		for CLASS_TYPE in $CLASS_TYPES; do
-			if [ "$QDISC_CMD" = "prio" -a "$CLASS_TYPE" = "INTERACTIVE" ]; then
-				PARENT_CLASSID=1
-				INTERACTIVE_FILTER_FLOWID=1
-			else
-				PARENT_CLASSID=$1
-					PARENT_CLASSID=${PARENT_CLASSID:-1}
-				INTERACTIVE_FILTER_FLOWID=40
-			fi
-
-			for FILTER_NUM in `seq 1 100`; do
-				eval FILTER="\$$CLASS_TYPE"_FILTER_$FILTER_NUM
-					[ -z "$FILTER" ] && break
-				eval FILTER_FLOWID="\$$CLASS_TYPE"_FILTER_FLOWID
-					$ECHO tc filter add dev $DEV parent $PARENT_CLASSID:0 $FILTER flowid $PARENT_CLASSID:$FILTER_FLOWID
-			done
+	for CLASS_TYPE in $CLASS_TYPES; do
+		if [ "$QDISC_CMD" = "prio" -a "$CLASS_TYPE" = "INTERACTIVE" ]; then
+			PARENT_CLASSID=1
+			INTERACTIVE_FILTER_FLOWID=1
+		else
+			PARENT_CLASSID=$1
+				PARENT_CLASSID=${PARENT_CLASSID:-1}
+			INTERACTIVE_FILTER_FLOWID=40
+		fi
+
+		for FILTER_NUM in `seq 1 100`; do
+			eval FILTER="\$$CLASS_TYPE"_FILTER_$FILTER_NUM
+				[ -z "$FILTER" ] && break
+			eval FILTER_FLOWID="\$$CLASS_TYPE"_FILTER_FLOWID
+				$ECHO tc filter add dev $DEV parent $PARENT_CLASSID:0 $FILTER flowid $PARENT_CLASSID:$FILTER_FLOWID
 		done
-
-		$ECHO
 	done
+
+	$ECHO
 }
 
+###########################################################################################################
+#
+#
 set_htb()
 {
-	for DEV in $DEVICES; do
-		$ECHO tc qdisc add dev $DEV root handle 1 htb default 60
-			$ECHO tc class add dev $DEV parent 1: classid 1:2 htb rate $LAN_RATE
-				$ECHO tc class add dev $DEV parent 1:2 classid 1:30 htb rate $WAN_SUB_RATE
-					$ECHO tc class add dev $DEV parent 1:30 classid 1:40 htb rate $INTERACTIVE_RATE prio 1
-					$ECHO tc class add dev $DEV parent 1:30 classid 1:50 htb rate $PRIVILEGED_RATE ceil $WAN_SUB_RATE prio 3
-		    			$ECHO tc class add dev $DEV parent 1:30 classid 1:60 htb rate $BESTEFFORT_RATE ceil $WAN_SUB_RATE prio 6
-
-				if [ $DIRECTION = "DOWN" ]; then 
+	$ECHO tc qdisc add dev $DEV root handle 1 htb default 60
+		$ECHO tc class add dev $DEV parent 1: classid 1:2 htb rate $DEV_RATE
+			$ECHO tc class add dev $DEV parent 1:2 classid 1:30 htb rate $WAN_SUB_RATE
+				$ECHO tc class add dev $DEV parent 1:30 classid 1:40 htb rate $INTERACTIVE_RATE prio 1
+				$ECHO tc class add dev $DEV parent 1:30 classid 1:50 htb rate $PRIVILEGED_RATE ceil $WAN_SUB_RATE prio 3
+	    			$ECHO tc class add dev $DEV parent 1:30 classid 1:60 htb rate $BESTEFFORT_RATE ceil $WAN_SUB_RATE prio 6
+
+				if [ $OUT_OF_WAN_RATE -gt 0 ]; then
 					$ECHO tc class add dev $DEV parent 1:2 classid 1:70 htb rate $OUT_OF_WAN_RATE prio 7
 				fi
 	
-		set_leaf_qdisc $DEV
+	set_leaf_qdisc
 
-		$ECHO
-	done
+	$ECHO
 
 	set_filters
 }
 
+###########################################################################################################
+#
+#
 set_hfsc()
 {
-	for DEV in $DEVICES; do
-		$ECHO tc qdisc add dev $DEV root handle 1 hfsc default 60
- 			$ECHO tc class add dev $DEV parent 1: classid 1:2 hfsc sc rate $LAN_RATE ul rate $LAN_RATE
-				$ECHO tc class add dev $DEV parent 1:2 classid 1:30 hfsc sc rate $WAN_SUB_RATE ul rate $WAN_SUB_RATE
-					$ECHO tc class add dev $DEV parent 1:30 classid 1:40 hfsc sc umax $INTERACTIVE_HFSC_UMAX dmax $INTERACTIVE_HFSC_DMAX rate $INTERACTIVE_RATE ul rate $INTERACTIVE_RATE
-					$ECHO tc class add dev $DEV parent 1:30 classid 1:50 hfsc sc umax $PRIVILEGED_HFSC_UMAX dmax $PRIVILEGED_HFSC_DMAX rate $PRIVILEGED_RATE ul rate $WAN_SUB_RATE
-					$ECHO tc class add dev $DEV parent 1:30 classid 1:60 hfsc sc rate $BESTEFFORT_RATE ul rate $WAN_SUB_RATE
-
-				if [ $DIRECTION = "DOWN" ]; then
+	$ECHO tc qdisc add dev $DEV root handle 1 hfsc default 60
+		$ECHO tc class add dev $DEV parent 1: classid 1:2 hfsc sc rate $DEV_RATE ul rate $DEV_RATE
+			$ECHO tc class add dev $DEV parent 1:2 classid 1:30 hfsc sc rate $WAN_SUB_RATE ul rate $WAN_SUB_RATE
+				$ECHO tc class add dev $DEV parent 1:30 classid 1:40 hfsc sc umax $INTERACTIVE_HFSC_UMAX dmax $INTERACTIVE_HFSC_DMAX rate $INTERACTIVE_RATE ul rate $INTERACTIVE_RATE
+				$ECHO tc class add dev $DEV parent 1:30 classid 1:50 hfsc sc umax $PRIVILEGED_HFSC_UMAX dmax $PRIVILEGED_HFSC_DMAX rate $PRIVILEGED_RATE ul rate $WAN_SUB_RATE
+				$ECHO tc class add dev $DEV parent 1:30 classid 1:60 hfsc sc rate $BESTEFFORT_RATE ul rate $WAN_SUB_RATE
+
+				if [ $OUT_OF_WAN_RATE -gt 0 ]; then
 					$ECHO tc class add dev $DEV parent 1:2 classid 1:70 hfsc sc rate $OUT_OF_WAN_RATE ul rate $OUT_OF_WAN_RATE
 				fi
 
-		set_leaf_qdisc $DEV
+	set_leaf_qdisc
 
-		$ECHO
-	done
+	$ECHO
 
 	set_filters
 }
 
+###########################################################################################################
+#
+#
 set_prio()
 {
 	PARENT_CLASSID=10
-	for DEV in $DEVICES; do
-		$ECHO tc qdisc add dev $DEV root handle 1 prio bands 2 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 # by default unclassified traffic goes to flowid 1:2
-			$ECHO tc qdisc add dev $DEV parent 1:1 handle 40: tbf rate $INTERACTIVE_RATE burst $INTERACTIVE_PRIO_BURST latency $INTERACTIVE_PRIO_LATENCY
-			$ECHO tc qdisc add dev $DEV parent 1:2 handle $PARENT_CLASSID: htb default 60
-				$ECHO tc class add dev $DEV parent $PARENT_CLASSID: classid $PARENT_CLASSID:30 htb rate $WAN_SUB_RATE
-					$ECHO tc class add dev $DEV parent $PARENT_CLASSID:30 classid $PARENT_CLASSID:50 htb rate $PRIVILEGED_RATE ceil $WAN_SUB_RATE prio 3
-					$ECHO tc class add dev $DEV parent $PARENT_CLASSID:30 classid $PARENT_CLASSID:60 htb rate $BESTEFFORT_RATE ceil $WAN_SUB_RATE prio 6
-
-				if [ $DIRECTION = "DOWN" ]; then
+	$ECHO tc qdisc add dev $DEV root handle 1 prio bands 2 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 # by default unclassified traffic goes to flowid 1:2
+		$ECHO tc qdisc add dev $DEV parent 1:1 handle 40: tbf rate $INTERACTIVE_RATE burst $INTERACTIVE_PRIO_BURST latency $INTERACTIVE_PRIO_LATENCY
+		$ECHO tc qdisc add dev $DEV parent 1:2 handle $PARENT_CLASSID: htb default 60
+			$ECHO tc class add dev $DEV parent $PARENT_CLASSID: classid $PARENT_CLASSID:30 htb rate $WAN_SUB_RATE
+				$ECHO tc class add dev $DEV parent $PARENT_CLASSID:30 classid $PARENT_CLASSID:50 htb rate $PRIVILEGED_RATE ceil $WAN_SUB_RATE prio 3
+				$ECHO tc class add dev $DEV parent $PARENT_CLASSID:30 classid $PARENT_CLASSID:60 htb rate $BESTEFFORT_RATE ceil $WAN_SUB_RATE prio 6
+
+				if [ $OUT_OF_WAN_RATE -gt 0 ]; then
 					$ECHO tc class add dev $DEV parent 10:1 classid $PARENT_CLASSID:70 htb rate $OUT_OF_WAN_RATE prio 7
-					fi
+				fi
 
-		set_leaf_qdisc $DEV $PARENT_CLASSID
+	set_leaf_qdisc $PARENT_CLASSID
 
-		$ECHO
-	done
+	$ECHO
 
 	set_filters $PARENT_CLASSID
 }
 
+###########################################################################################################
+#
+#
+set_ifb()
+{
+	$ECHO ip link set dev $IFB_DEV up
+		$ECHO tc qdisc add dev $DEV ingress handle ffff:
+			$ECHO tc filter add dev $DEV parent ffff: protocol ip prio 10 u32 match u32 0 0 action mirred egress redirect dev $IFB_DEV > /dev/null 2>&1
+}
+
+###########################################################################################################
+#
+#
 set_police()
 {
+
+# Calculation of policing bursts
+#       burst = rate / 17 (taken basing on experemental results)
+
+	POLICE_BURST_SCALE=17
+        WAN_POLICE_BURST=$((WAN_RATE / POLICE_BURST_SCALE))
+
+	WAN_POLICE_FLOWID=1
+
+	$ECHO tc qdisc add dev $DEV handle ffff: ingress
+	$ECHO tc filter add dev $DEV parent ffff: protocol ip prio 999 u32 match ip src 0.0.0.0/0 police rate $WAN_RATE burst $WAN_POLICE_BURST drop flowid :$WAN_POLICE_FLOWID
+ 
+	$ECHO
+}
+
+###########################################################################################################
+#
+#
+set_cpolice()
+{
+
+	# Calculation of policing bursts
+	#       burst = rate / 17 (taken basing on experemental results)
+
+	POLICE_BURST_SCALE=17
+        	INTERACTIVE_POLICE_BURST=$((INTERACTIVE_RATE / POLICE_BURST_SCALE))
+	        PRIVILEGED_POLICE_BURST=$((PRIVILEGED_RATE / POLICE_BURST_SCALE))
+        	BESTEFFORT_POLICE_BURST=$((BESTEFFORT_RATE / POLICE_BURST_SCALE))
+
 	CLASS_TYPES="INTERACTIVE PRIVILEGED"
 		INTERACTIVE_POLICE_FLOWID=1
 		PRIVILEGED_POLICE_FLOWID=2
 
-	for DEV in $DEVICES; do
-		$ECHO tc qdisc add dev $DEV handle ffff: ingress
-
-		for CLASS_TYPE in $CLASS_TYPES; do
-			for FILTER_NUM in `seq 1 100`; do
-				eval FILTER="\$$CLASS_TYPE"_FILTER_$FILTER_NUM
-					[ -z "$FILTER" ] && break
-				eval FILTER_FLOWID="\$$CLASS_TYPE"_POLICE_FLOWID
-				eval FILTER_RATE="\$$CLASS_TYPE"_RATE
-				eval FILTER_BURST="\$$CLASS_TYPE"_POLICE_BURST
-					$ECHO tc filter add dev $DEV parent ffff: $FILTER police rate $FILTER_RATE burst $FILTER_BURST continue flowid $FILTER_FLOWID:
-			done
+	$ECHO tc qdisc add dev $DEV handle ffff: ingress
+
+	for CLASS_TYPE in $CLASS_TYPES; do
+		for FILTER_NUM in `seq 1 100`; do
+			eval FILTER="\$$CLASS_TYPE"_FILTER_$FILTER_NUM
+				[ -z "$FILTER" ] && break
+			eval FILTER_FLOWID="\$$CLASS_TYPE"_POLICE_FLOWID
+			eval FILTER_RATE="\$$CLASS_TYPE"_RATE
+			eval FILTER_BURST="\$$CLASS_TYPE"_POLICE_BURST
+				$ECHO tc filter add dev $DEV parent ffff: $FILTER police rate $FILTER_RATE burst $FILTER_BURST continue flowid :$FILTER_FLOWID
 		done
+	done
 
-		$ECHO tc filter add dev $DEV parent ffff: protocol ip prio 999 u32 match ip src 0.0.0.0/0 police rate $BESTEFFORT_RATE burst $BESTEFFORT_POLICE_BURST drop flowid :3
+	$ECHO tc filter add dev $DEV parent ffff: protocol ip prio 999 u32 match ip src 0.0.0.0/0 police rate $BESTEFFORT_RATE burst $BESTEFFORT_POLICE_BURST drop flowid :3
  
-		$ECHO
-	done
+	$ECHO
 }
 
+###########################################################################################################
+#
+#
 get_stats()
 {
-	for DEV in $WAN_DEVICES $LAN_DEVICES; do
-		echo $DEV Statistics
-		echo
-		echo "   Classes:"
-		echo "--------------------------"
-			$ECHO tc -s class show dev $DEV
-
-		echo
-		echo "   Leaf Queuing Disciplines:"
-		echo "--------------------------"
-			$ECHO tc -s qdisc show dev $DEV
-
-		echo
-		echo "   EGRESS Filters:"
-		echo "--------------------------"
-			$ECHO tc -s filter show dev $DEV
+	echo $DEV Statistics
+	echo
+	echo "   Classes:"
+	echo "--------------------------"
+		$ECHO tc -s class show dev $DEV
+
+	echo
+	echo "   Leaf Queuing Disciplines:"
+	echo "--------------------------"
+		$ECHO tc -s qdisc show dev $DEV
+
+	echo
+	echo "   EGRESS Filters:"
+	echo "--------------------------"
+		$ECHO tc -s filter show dev $DEV
 			$ECHO tc -s filter show dev $DEV parent 10: # if PRIO qdisc is applied
 		
-		echo
-		echo "   INGRESS Policing Filters:"
-		echo "--------------------------"
-			$ECHO tc -s filter show dev $DEV parent ffff:
-
- 		echo
-		echo
- 	done
+	echo
+	echo "   INGRESS Policing Filters:"
+	echo "--------------------------"
+		$ECHO tc -s filter show dev $DEV parent ffff:
+
+	echo
 }
 
+###########################################################################################################
+#
+#
 compile()
 {
 	DEBUG=1
@@ -233,6 +378,9 @@ compile()
 	start
 }
 
+###########################################################################################################
+#
+#
 start()
 {
 	checkconfig || return 1
@@ -240,29 +388,29 @@ start()
 	if [ $DEBUG -gt 0 ]; then 
 		ECHO="echo"
 	else
-		ebegin "Starting QoS"
+		ebegin "Starting QoS at $DEV"
 	fi
 
-	for LINK_DIRECTION in UP DOWN; do
-		configure $LINK_DIRECTION
-			reset
-
-			eval QDISC_CMD="\$$LINK_DIRECTION"LINK_QDISC
-				if [ ! "$QDISC_CMD" = "none" ]; then
-					set_$QDISC_CMD
-				fi
+	reset
 
-			eval INGRESS_CMD="\$$LINK_DIRECTION"LINK_INGRESS
-				if [ ! "$INGRESS_CMD" = "none" ]; then
- 					set_$INGRESS_CMD
+	for LINK_DIRECTION in EGRESS INGRESS; do
+		configure $LINK_DIRECTION
+			eval ALG_CMD="\$$LINK_DIRECTION"_ALG
+				if [ ! "$ALG_CMD" = "none" ]; then
+					set_$ALG_CMD
 				fi
 	done
 
+describe > /tmp/$$
+
 	if [ $DEBUG -eq 0 ]; then
 	 	eend $?
 	fi
 }
 
+###########################################################################################################
+#
+#
 stop()
 {
 	checkconfig || return 1
@@ -270,10 +418,9 @@ stop()
 	if [ $DEBUG -gt 0 ]; then
 		ECHO="echo"
 	else
-		ebegin "Stopping QoS"
+		ebegin "Stopping QoS at $DEV"
 	fi
 
-	configure ALL
 	reset
 
 	if [ $DEBUG -eq 0 ]; then
@@ -281,13 +428,21 @@ stop()
 	fi
 }
 
+###########################################################################################################
+#
+#
 restart()
 {
 	stop
 	start
 }
 
-status()
+###########################################################################################################
+#
+#
+describe()
 {
+	checkconfig || return 1
+
 	get_stats
-}
+}
\ No newline at end of file